MOCA Yacht for Sale

• Medical kits & service 
• Safety: ditch kits, life rafts, immersion suits, fire suppression 
• Hydraulics: davits, transformers-repairing, reservicing, & replacing 
• Class/Flag: completed Cayman and ABS surveys and certificates 
• Stabilizers
• Canvas work: cushions, covers & shades
• Teak decks: re caulking, sanding – decks re caulked 
• 5-year ABS survey completed 
• Load Bank Installed
• New steel 8x5 foot section installed aft stbd corner per ABS requirement, new fairing and painting 
• Wing station equipment on both sides replaced 
• Quantum Stabilizers dropped, new extenders installed, and units serviced per manual 

• Owner’s cabin apartment on Upper Deck
• 2 VIP cabins on Main Deck
• 1 Double cabin
• 3 Twin cabins on Lower Deck
• 1 Children playroom on Sun Deck

CREW ACCOMMODATION

• 1 Captain’s cabin on Upper Deck
• 1 1st Officer’s cabin on Upper Deck
• 1 Chief Engineer Cabin on Upper Deck
• 1 Owner’s staff cabin (2 beds) on Upper Deck
• 5 Double cabins on Lower Deck

• Anchor windlasses 2 x Opem Sistemi vertical windlasses, each having a wildcat gypsy and capstan driven by an electric motor
• Anchors
• 2 x Wortelboer HHP (High Holding Power) anchors, made of galvanised steel, fully balanced, with swivel; weight in accordance with Classification Society requirements.
• Chains 2 x Wortelboer U3 high tensile steel hot deep galvanised chains with stud link. Size and length will be according to Classification Society requirements.
• Capstans
• 2 x Opem Sistemi electric capstans on the aft deck, capable to rotate in both directions, due to be operated with deck-mounted push buttons.
• Cranes 2 x Tecnimpianti hydraulically operated travel cranes fitted in the aft garage for launching and recovery of main tender and wave runners.
• Maximum lifting capacity 2800 kg.1 x Pincraft hydraulically operated crane integrated with the fore mast fitted in the bow area for launching and recovery of service tender.
• Maximum lifting capacity 2000 kg.1 x Pincraft hydraulically operated crane fitted in the bow area for the launching and recovery of SOLAS rescue boat.
• Maximum lifting capacity 1000 kg.
• Shell doors 1 x Tecnimpianti hydraulically operated shell door fitted on the stern for launching and recovery of tenders and wave runners. 1 x Tecnimpianti hydraulically operated shell door fitted at lower deck level in the crew quarter (midship) for goods embarkation. 1 x Tecnimpianti hydraulically operated hatch closing the SOLAS rescue boat bay.
• Swimming platform 2 x Opacmare transformer swimming platforms integrated in the stern fixed rubbing strakes.
• Gangway 1 x Tecnimpianti telescopic retractable, hydraulically operated stern gangway (made with painted aluminum structure), arranged to be part of the transom when closed: - Max 6.5 length fully extended (3.7 from the aft end of fixed platforms) - Net Walkway width equal to 600 mm
• Guest Elevator 1 x Bertazzoni hydraulically operated lift serving lower, main, upper and sun decks. Safety working load 350 kg.
• Food lift 2 x Bertazzoni food lift serving respectively lower deck and main deck, and main deck, upper deck, sun deck, max working load 60 kg/each.
   

• SAFETY SYSTEM
• EPIRB EPIRB SAILOR 406
• SAILOR RADAR REFLECTOR
• RTX PORTABLE VHF SAILOR SP 3520 GMDSS compliance
• Commercial Portable VHF 4.4 METEO RECEIVER RICEVITORE NAVTEX FURUNO NX 700 - B 4.5
• SISTEMA AIS system for integration with Cartography system
• SSAS SYSTEM SSAS SAILOR System L RIT compliance
• THERMAL CAMERA SYSTEM Thermal camera Flir Model M625L
• 4BNWAS SYSTEM BNWAS system Furuno integrated on WHC system For N. 4 reset station (Wheelhouse, Captain cabin, Crew-Mess, 1st. Officer)
• TENDER TRACKING SYSTEM Tender tracking System Seetrac comprising of: Transas NS4000 License NBT license Main Vessel Transponder KIT
• (Base Station Transponder) Tender Transponder KIT (Tender Transponder station) Transducer for Tender Jet-Ski transponder KIT (Jet-Ski Transponder station)

Exterior & Interior Work List

• All skin valves replaced 
• Propellors and shafts removed and realigned 
• Bottom paint job
• Shaft seals replaced 
• All laundry equipment serviced
• All refrigerators and freezers on board serviced 
• 2x exterior doors replaced 
• All engine room machinery serviced 
• Much of air conditioning insulation replaced 
• All treadmills serviced 
• Some navigation & communication equipment in bridge replaced 
• Carpets replaced throughout 
   

Deck Work List 

• All tenders at jet skis serviced
• New compass deviation card
• Elevator serviced 
• Tender garage interior paint job
• Anchor locker & chains paint job
• All new cushion covers made
• New swim platform (new teak on swim platform)
• New transformers
• Stern of hull repainted 
• Entire vessel waxed by 5 step process 
• Other

Medical kits & service 

• Safety: ditch kits, life rafts, immersion suits, fire suppression 
• Hydraulics: davits, transformers-repairing, reservicing, & replacing 
• Class/Flag: completed Cayman and ABS surveys and certificates 
• Stabilizers
• Canvas work: cushions, covers & shades
• Teak decks: re caulking, sanding – decks re caulked 
• 5-year ABS survey completed 
• Load Bank Installed
• New steel 8x5 foot section installed aft stbd corner per ABS requirement, new fairing and painting 
• Wing station equipment on both sides replaced 
• Quantum Stabilizers dropped, new extenders installed, and units serviced per manual 

• Anchor windlasses 2 x Opem Sistemi vertical windlasses, each having a wildcat gypsy and capstan driven by an electric motor

Anchors

• 2 x Wortelboer HHP (High Holding Power) anchors, made of galvanised steel, fully balanced, with swivel; weight in accordance with Classification Society requirements.
• Chains 2 x Wortelboer U3 high tensile steel hot deep galvanised chains with stud link. Size and length will be according to Classification Society requirements

Capstans

• 2 x Opem Sistemi electric capstans on the aft deck, capable to rotate in both directions, due to be operated with deck-mounted push buttons.
• Cranes 2 x Tecnimpianti hydraulically operated travel cranes fitted in the aft garage for launching and recovery of main tender and wave runners. Maximum lifting capacity 2800 kg.1 x Pincraft hydraulically operated crane integrated with the fore mast fitted in the bow area for launching and recovery of service tender. Maximum lifting capacity 2000 kg.1 x Pincraft hydraulically operated crane fitted in the bow area for the launching and recovery of SOLAS rescue boat. Maximum lifting capacity 1000 kg.
• Shell doors 1 x Tecnimpianti hydraulically operated shell door fitted on the stern for launching and recovery of tenders and wave runners. 1 x Tecnimpianti hydraulically operated shell door fitted at lower deck level in the crew quarter (midship) for goods embarkation. 1 x Tecnimpianti hydraulically operated hatch closing the SOLAS rescue boat bay. Swimming platform 2 x Opacmare transformer swimming platforms integrated in the stern fixed rubbing strakes.
• Gangway 1 x Tecnimpianti telescopic retractable, hydraulically operated stern gangway (made with painted aluminum structure), arranged to be part of the transom when closed: - Max 6.5 length fully extended (3.7 from the aft end of fixed platforms) - Net Walkway width equal to 600 mm
• Guest Elevator 1 x Bertazzoni hydraulically operated lift serving lower, main, upper and sun decks. Safety working load 350 kg.
• Food lift 2 x Bertazzoni food lift serving respectively lower deck and main deck, and main deck, upper deck, sun deck, max working load 60 kg/each.